Unlocking Tail Spend in Australian Government Procurement

Picture of Ishwarya Pandian

Ishwarya Pandian

Published On: 11/15/2026

Group-1000005301.png

Listen to this blog

Unlocking Tail Spend in Australian Government Procurement
Watch the on-demand webinar

Listen to this blog

TL;DR 

  • More than half of Commonwealth contracts (51.91% in 2023–24) were below the then $80,000 threshold. They held 1.38% of contract value. 
  • Every one of those buys still needs value for money, a record, written approval and standard terms. When the week is full, negotiation is what gets skipped. 
  • Recent audits keep finding thin records: 53% of 231 approvals didn’t always show value for money was achieved, and 42% of 33 contracts had no record of the value estimate. 
  • An AI negotiation agent can collect quotes and run rounds on eligible small buys, inside limits your authorised officer sets. The officer still decides every commitment. 
  • On $50 million of below‑threshold spend, a planning estimate puts the annual saving at $0.45m to $1.5m. There’s no ANZ government benchmark yet, so start with your own data.

Picture your smallest contract from last year. Now ask who negotiated it. 

For most agencies, the honest answer is nobody. A quote came in, it was within budget, and someone raised the purchase order. It comes down to arithmetic. Small buys make up most of the contract count, and each one carries the same paperwork as a big one. 

This post sets out the numbers, what the auditors keep finding, and a way to negotiate more of those small buys while your authorised officers keep every commitment. It draws on Paper 02 in our Australian Government Procurement Series, unlocking tail spend. You can download the full executive briefing at the end. 

Why does tail spend matter in government procurement? 

Because it’s most of the work. 

In 2023–24, 51.91% of Commonwealth contracts reported on AusTender were below the then $80,000 threshold. Those contracts held just 1.38% of total contract value (Department of Finance). They averaged about $32,000 each. Contracts above the line averaged about $2.4 million. 

The band is getting bigger. On 17 November 2025, the open‑tender threshold for non‑corporate Commonwealth entities rose to $125,000. The Finance Minister said about 31,000 contracts, worth almost $2 billion, fall in the new band.

The private sector sees the same shape. BCG puts tail spend at about 80% of transactions and about 20% of spend (BCG, Taming Tail Spend). In The Hackett Group’s 2025 Tail Spend Management Study, only 4% of organisations said they actively manage most of their tail spend. 

Each buy is small. Together, they take up most of your team’s week. 

Read More Tail Spend Analysis

What does a small buy still have to carry? 

A $11,500 purchase still has to: 

  • show value for money, where price is not the only factor and ethical conduct counts (CPR 4.4 and 4.5) 
  • keep records that match its scale, scope and risk (CPR 7.2) 
  • get written approval to commit the money (PGPA Rule section 18, RMG 400) 
  • meet ethical and conflict‑of‑interest duties (CPR 6.6) 
  • use the Commonwealth Contracting Suite under $200,000 (CPR 6.12) 

Depending on who’s buying, more rules may apply. Non‑corporate entities buying between $10,000 and $125,000 outside standing offers must approach Australian businesses (CPR 5.4). Some panels are SME‑only under $125,000 (CPR 5.5). The Indigenous Procurement Policy applies first where relevant. In New Zealand, buys under $100,000 go to capable New Zealand businesses unless there is good reason not to (Government Procurement Rules, Rule 8.2). Mandated channels such as State Purchase Contracts, panels and marketplaces come first everywhere. 

None of this is optional, and all of it takes officer time. When the paperwork grows, negotiation is the step that loses out. There’s simply no time left for a second round. 

What are the auditors finding? 

A higher threshold changes the method you can use. You still have to show your working. 

Two recent ANAO reports make the point: 

An older finding is worth knowing. In 2017–18, ANAO flagged 4,914 contracts as possibly related, a possible sign of contract splitting. More contracts sat just below $80,000 than just above it (ANAO Report No. 19, 2017–18). 

The fix is plain. Record the estimate before you choose the method (CPR 9.2). Keep the quotes and the reasons with each award. Include below‑threshold awards when you sample for assurance. None of these audit reports is about negotiation itself, but each one is about the record negotiation should leave. 

How can AI negotiation work inside the procurement rules? 

It starts with what the agent is allowed to touch. 

In the approach set out in the paper, Merlin Intake is the front door for low‑value requests. A request goes to the Merlin Autonomous Negotiation Agent (ANA) only when it passes four checks: 

  1. It’s below the market threshold. 
  2. The category is approved for ANA. 
  3. There are enough eligible suppliers. 
  4. It’s inside the officer’s delegation. 

If any check fails, the request goes to an officer‑led route. If a mandated channel covers the buy, such as a panel, a standing offer or a State Purchase Contract, that route comes first. 

One control matters more than the others: value is fixed before routing. Intake works from the value estimated before going to market. A need at or above the threshold never reaches ANA, so ANA can’t be used to bring a buy under it. 

The market threshold Intake checks depends on who you are: 

Buyer  Open‑market threshold 
Commonwealth, non‑corporate entities  $125,000 
Commonwealth, prescribed corporate entities  $400,000 
Commonwealth, construction  $7.5 million 
New Zealand, goods and services (GETS advert)  $100,000 
States and territories  Their own figure, set at Gate 1 

Sources: CPR 9.7; NZ Government Procurement Rules, Rule 10. 

Once a request is eligible, ANA collects quotes from approved suppliers and negotiates within the agreed limits on price, term and service. Thresholds, categories and supplier lists are set for your agency during implementation. Individual users can’t change them. 

Where does the authorised officer stay in control? 

At two gates. 

  • Gate 1 is set once. An authorised officer approves the categories, the suppliers and the price, term and service limits ANA works within. This happens at setup, not on every buy. 
  • Gate 2 is every buy. The officer reads the quotes, the rounds and the reasons, then converts the award to a purchase order, or doesn’t. Nothing converts on its own. 

Here’s how that plays out in the paper’s illustrative example. A facilities renewal is due. The incumbent price is $11,500. Four suppliers are invited. Supplier A’s first offer is 8% above the price limit, so it isn’t accepted. Supplier D doesn’t reply after two follow‑ups. ANA recommends Supplier B at $11,040, which is 4% below the $11,500 incumbent price. 

The officer reviews the record at Gate 2 and decides. From request to purchase order takes five working days. If no offer had fallen within the limits, ANA would have made no recommendation and handed the request back with the full record. 

At Gate 2, the officer sees: 

  • every quote, on a comparable basis 
  • each round and each supplier’s response 
  • the reasons for the recommendation 

Each step is timestamped, so the record an auditor asks for already exists. 

The figures are illustrative, not from a real procurement. 

How much could your agency save? 

There’s no ANZ government benchmark yet. So size it with numbers you already hold, plus a published range. 

Input  Example 
Below‑threshold spend a year (from AusTender or GETS)  $50 million 
Share eligible for ANA, after exclusions  60% (example) 
Planning saving rate  1.5% to 5% 
Illustrative annual saving estimate  $0.45m to $1.5m 

Where does 1.5% to 5% come from? Walmart’s automated negotiation with tail‑end suppliers reported about 1.5% in its pilot (Harvard Business Review) and about 3% at larger scale. BCG reports 5% to 10% for broader tail‑spend programmes, so we capped the top of the range at 5%. The sources measure different things in different settings, so treat 1.5% to 5% as a planning range. 

Two things to settle with finance before you start. Leave standing offers, fixed‑price panels and sole‑source buys out of the eligible share. Then agree whether a saving counts against the incumbent price, the last purchase or the first quote. Officer time saved is a second return. 

Which rules apply to AI‑assisted negotiation? 

The ones you already follow. No Commonwealth, state or New Zealand rule mentions AI‑assisted negotiation by name. 

The Commonwealth Procurement Rules, the PGPA Rule and the New Zealand Government Procurement Rules (5th edition, from 1 December 2025) apply as they stand. The CPR negotiation rules (10.18 and 10.19) cover tenders above the threshold. ANA works below it. New Zealand agencies still document the process and decisions under Rule 46. States and territories set their own thresholds, templates and supplier policies, and those figures go in at Gate 1. 

On AI governance, Commonwealth agencies follow the DTA’s Policy for the responsible use of AI in government v2.0, in force from 15 December 2025. It asks for accountable officials, a use‑case register, an impact assessment and a transparency statement. An ANA deployment is a use case you register and assess. In New Zealand, the Algorithm Charter for Aotearoa New Zealand and the Responsible AI Guidance for the Public Service apply. Our first paper in this series, From Policy to Practice, covers that process. 

For deployment assurance, Zycus has been IRAP assessed at the PROTECTED level, and holds SOC 1 and SOC 2 Type II reports and ISO/IEC 27001:2022 certification. Merlin’s AI runs in‑region, and customer data isn’t used to train the models. 

How do you start? A 90‑day pilot path 

This is an indicative path. Timelines vary with agency size, approvals and supplier data. 

  1. Days 1 to 30: scope. Pick two or three categories. Agree suppliers, limits and delegations. 
  2. Days 31 to 60: configure. Set limits and approval steps. Agree the saving baseline with finance. Test on non‑live data and brief officers. 
  3. Days 61 to 90: pilot. Run one live category, with officers converting every purchase order. Sample the records at day 75. 

Your security, privacy and AI governance approvals start on day 1. They usually set the start date. Live negotiation waits until they clear. 

What should the pilot measure? Agree these before day 61:

Measure  How to count it 
Share of eligible requests ANA handled  ANA requests ÷ eligible requests 
Quotes compared per buy  Before and after 
Negotiated saving  Against the agreed baseline 
Officer time per buy  Hours per quote cycle, before and after 
Records complete at day 75  Buys with a full record ÷ buys sampled 
Supplier response rate  By category 

Five questions to answer before you pilot 

The paper ends with a twelve‑question self‑check. Start with these: 

  1. Can you list last year’s below‑threshold buys by category from one place? 
  2. Is the value estimated and recorded before the method is chosen? 
  3. Does each award record who decided and when? 
  4. Do you have a process to register and assess AI use cases? 
  5. Has finance agreed how a procurement saving is counted? 

If any of the first four is a no, close it first. Those are the essentials, whatever your total score. 

Unlocking tail spend in Australian government procurement - Request A Demo Zycus

Frequently asked questions 

1. What is tail spend in government procurement? 

Tail spend is the large number of low‑value purchases that make up most transactions but a small share of spend. In Australian government, it is mostly buying below the open‑tender threshold. In 2023–24, 51.91% of Commonwealth contracts were below the then $80,000 threshold and held 1.38% of contract value. 

2. What is the Commonwealth procurement threshold now? 

From 17 November 2025, open tender applies from $125,000 for non‑corporate Commonwealth entities, $400,000 for prescribed corporate entities and $7.5 million for construction. In New Zealand, goods and services must be advertised on GETS from $100,000. States and territories set their own figures. 

3. Is AI‑assisted negotiation allowed under the Commonwealth Procurement Rules? 

No Commonwealth, state or New Zealand rule mentions it by name. Existing duties apply: value for money, records, written approval and standard terms. Commonwealth agencies also register and assess the use case under the DTA’s Policy for the responsible use of AI in government. 

4. Who makes the decision when an AI agent negotiates? 

An authorised officer. The officer sets the limits once at Gate 1 and decides on every buy at Gate 2. The agent recommends. Nothing converts to a purchase order without the officer. 

5. Can an AI agent be used to split contracts or avoid the threshold? 

In the approach in this paper, no. The value is estimated and fixed before routing, as CPR 9.2 requires. A need at or above the threshold never reaches the agent. 

6. How much can an agency save by negotiating tail spend? 

There is no ANZ government benchmark yet. A planning range of 1.5% to 5%, based on published Walmart results and BCG research, gives $0.45m to $1.5m a year on $50 million of below‑threshold spend with a 60% eligible share. 

7. How long does a pilot take? 

About 90 days on the indicative path: scope, configure, then one live category. Agency security, privacy and AI governance approvals usually set the start date. 

Build or Buy Your Procurement AI?

Build or Buy Your Procurement AI?

Share:

Ishwarya Pandian
Ishwarya is a Go-to-Market specialist at Zycus, where she engages with procurement leaders on topics related to digital transformation and modern procurement strategy. Through her work closely supporting global procurement events and interacting with customers and industry leaders, she gains practical insights into how organizations are leveraging AI, automation, and data-driven platforms to evolve Source-to-Pay processes and unlock greater efficiency, cost savings, and strategic impact.

Analyst Reports on Agentic AI

Subscribe to Blogs!

Get the latest blogs, insights, tips and exclusive content delivered to you inbox, Join Now

Subscribe by email

Opens your email app, addressed to crm@zycus.com.

Recommended blogs 

Intake to Outcome demo

Please share all the required details by sending an email to crm@zycus.com. Our team will review your request and assist you further.